The purpose of this study is to prepare a new ion imprinted polymer for MoVI with high selectivity. Ion-imprinted polymer (IIP) particles were synthesized by thermally copolymerization. For the synthesis of the ion imprinted polymer, the ion pair of (MoVI-thiocyanate) and NR4+ was used. The ion pair was precipitated in an aqueous phase and then dissolved in acetonitrile as a porogen. The imprinted ion was removed using 10% (v/v) methanol in HCl (0.5 mol L-1). The unleached and leached IIP particles were characterized by infrared spectroscopy, thermogravimetric analysis, surface area analysis, scanning electron microscopy and energy dispersive X-ray analysis. The use of the new MoVI-IIP in solid phase extraction revealed a maximum adsorption capacity of 3.77 mg MoVIper gram of MoVI-IIP in optimum conditions of extraction. The selectivity coefficients of the IIP for Mo in comparison with other metal ions were also evaluated. The proposed Mo-IIP was successfully applied for MoVI determination in different types of water samples.

A method for the determination of trace amounts of palladium was developed using homogeneous liquid-liquid microextraction via flotation assistance (HLLME-FA) followed by graphite furnace atomic absorption spectrometry (GFAAS). Ammonium pyrrolidine dithiocarbamate (APDC) was used as a complexing agent. This was applied to determine palladium in three types of water samples. In this study, a special extraction cell was designed to facilitate collection of the low-density solvent extraction. No centrifugation was required in this procedure. The water sample solution was added to the extraction cell which contained an appropriate mixture of extraction and homogeneous solvents. By using air flotation, the organic solvent was collected at the conical part of the designed cell. Parameters affecting extraction efficiency were investigated and optimized. Under the optimum conditions, the calibration graph was linear in the range of 1.0-200 µg L-1 with a limit of detection of 0.3 µg L-1. The performance of the method was evaluated for the extraction and determination of palladium in water samples and satisfactory results were obtained. In order to verify the accuracy of the approach, the standard addition method was applied for the determination of palladium in spiked synthetic samples and satisfactory results were obtained.

A furan-triazole derivative has been explored as an ionophore for preparation of a highly selective Pr(III) membrane sensor. The proposed sensor exhibits a Nernstian response for Pr(III) activity over a wide concentration range with a detection limit of 5.2×10-8 M. Its response is independent of pH of the solution in the range 3.0-8.8 and offers the advantages of fast response time. To investigate the analytical applicability of the sensor, it was applied successfully as an indicator electrode in potentiometric titration of Pr(III) solution and also in the direct and indirect determination of trace Pr(III) ions in some samples.